GT STEERING WHEEL
Features
Specification
FaQ
Downloads & Settings
Features
Rexing GT steering wheel is used as addon wheel for PC games and simulations featuring:
- Full carbon fiber body
- 4.3″ wide angle color LCD by Ultimate Game Tech
- 15 rpm LEDs, 6 additional marshal LEDs
- Original alcanatara grips
- Analog joystick/thumbstick
- 13 configurable push-buttons:
- 8 highest quality industrial push-buttons with snap action
- 4 high-quality tactile switches arranged in D-Pad configuration
- configurable center push on analog joystick
- 2 thumb rotary encoders
- 2 additional rotary encoders on the front of the wheel
- 12 position switch
- 2 momentary toggle switches, each with up and down position and spring return to center
- tempered glass display cover
- all aluminium knobs
BACK OF THE STEERING WHEEL FEATURES:
- Magnetic paddle shifters
- Aluminium hub on the back – accepts 50.8 mm and 70 mm wheel bases and quick releases
- Non-proprietary connector on the back of the wheel (easy to replace or make your own cable)
- High quality USB spiral cable included
- Requires only one USB connection
- Included with each steering wheel: 2 sets of 12 high-quality elastic self-adhesive labels for push-buttons, and various additional labels for customization
Specification
Rexing full carbon fiber formula steering wheel specifications:
Weight: 1.050 g
Diameter: 290 mm
Grip section oval 42 x 26 mm at the thickest section
Entirely made of carbon fiber and epoxy composite
FaQ
[elementor-template id=”867″]
Downloads & Settings
The wheel is connected to a USB port using a coiled USB cable that comes with the steering wheel. Plug it directly into a powered USB hub if you have one. If your USB hub is too far, use a higher quality extension USB cable not longer than 2 m, and plug it directly into your PC (PC back USB connector), not in the hub. If you need a longer cable, use an active USB cable (repeater). Also, plug the coiled cable directly into the active cable, and active cable directly into the computer.
CORRECT WAY:
Rexing coiled cable -> Powered hub -> PC
Rexing coiled cable -> extension USB cable up to 2 m -> PC
Rexing coiled cable -> active USB cable (repeater) up to 5 m -> PC
NOT RECOMMENDED (can cause issues with connection):
Rexing coiled cable -> USB extension cable -> Powered hub -> PC
Rexing coiled cable -> USB extension cable longer than 2 m -> PC
SOFTWARE INSTALLATION
In order to install Ultimate Game Tech software to PC, follow this order:
Download and install the latest UGT software version from this site:
https://www.asetek.com/gamingenthusiasts/asetek-simsports/software/ugt-manager/download-ugt-manager
Plug in device
Open UGT Manager
Run each installed game once – games will now be detected by UGT Manager
Toggle data output on each game by clicking on the data output button. Enabled = data is outputting. Disabled = not outputting. Info = data output is controlled by the game. Click on “Info” for any additional steps required.
Go to Global Options->Global mappings and map a button to Page_Up and Page_Down to change layouts when in a game
Go to Global Options->Global Settings to configure LED brightness and behavior and layouts available and special layout behavior.
Individual game settings and mapping can be configured by clicking on the game’s mappings or settings button. Note, this overrides the global options for the specific game.
Make sure you are always running updated firmware.
For more info on how to configure software, please refer to:
https://www.asetek.com/media/2612/ugt-manager-guide2.pdf
